Aiko 100% MAPP Gas 14.1OZ/400G High-Heat Fuel for Welding, Soldering & Brazing | Professional Torch Gas Canister for Metalworking & Plumbing Repairs

Aiko 100% Mapp Gas 14.1OZ/400G | Model : GAS-MAPPRO-A

Use only with Torches designed for Propylene Fuel

Before Use:

• Check cylinder and torch seals. Never use with damaged or missing seals. Discard cylinder if dirt or rust particles are in valve area.
• Turn off torch.
• Hold cylinder upright while attaching torch.
• Attach cylinder outdoors away from pilot lights, flames, sparks, and other ignition sources. They can ignite leaking gas.
• Hand tighten only. Never use tools to tighten. Over-tightening can damage seals. 
• Check for leaks. Put soapy water on connections. Look for bubbles. Listen for hiss of escaping gas. Feel for extreme cold, smell for rotten egg odor. Do not use if leaking.

During Use:

• Use upright to prevent flare-ups or flashes. Never drop or throw cylinder.
• If torch sputters or flares up, turn cylinder upright and turn off torch. Vent area to remove unburned gas. Slowly turn on. After hearing slight hiss, re-light.
• Never use near pilot lights, flames sparks, and other ignition sources. They can ignite leaking gas.

After Use:

• Turn off torch. Let cool.
• Detach torch when not in user.
• Detach outdoors away from pilot lights, flames, sparks, and other ignition sources. They can ignite leaking gas. 
• Replace cap to keep valve clean.